Alabastro DI Volterra
Sandstone · Italy · photos on request
In brief. Alabastro DI Volterra is a beige sandstone from Italy. Marmi di Carrara supplies it as blocks, slabs of 2 and 3 cm, tiles and cut-to-size elements, in the finishes typical of this family: natural cleft, honed, sandblasted, bush-hammered. Typical uses: façades, paving, garden and landscape works.
AboutTechnical sheetWhere to use itFinishesWeightsCarePhotosFAQ
Ask for photos of Alabastro DI Volterra
About Alabastro DI Volterra
Alabastro DI Volterra is a fine-grained sandstone sourced from the historic quarries of Volterra, Italy. Its warm beige and cream tones are accented by subtle, fine-grained veining that lends a gentle, natural elegance to any space. This versatile stone is ideal for both interior and exterior applications, including flooring, wall cladding, countertops, and decorative facades. It responds beautifully to a range of finishes—from polished to honed, and brushed to matte—allowing architects and designers to tailor its appearance to the project’s aesthetic. Marmi di Carrara supplies Alabastro DI Volterra in blocks, 2–3 cm slabs, and cut-to-size pieces, with photographic references of actual slabs available before purchase.
Typically beige and cream sandstone.
Where to use Alabastro DI Volterra
| Interior floors | Good |
|---|---|
| Wall cladding | Good |
| Kitchen worktops | Not recommended |
| Bathrooms and wet areas | With care |
| Exterior paving and façades | Excellent |
| Frost exposure | Good |
| Back-lighting | Not suitable |
General guidance for the sandstone family. The right thickness, finish and treatment for Alabastro DI Volterra are confirmed on your project.
Weights and logistics
| Thickness (mm) | about 23 kg/m² |
|---|---|
| Thickness (mm) | about 46 kg/m² |
| Thickness (mm) | about 69 kg/m² |
| Thickness (mm) | about 92 kg/m² |
| Thickness (mm) | about 115 kg/m² |
| Slab 300 × 180 cm, 2 cm | about 248 kg |
| Slab 300 × 180 cm, 3 cm | about 373 kg |
| 20-foot container (about 27 t) | about 590 m² of 2 cm slabs |
Weights are calculated from the typical density of the stone family; the packing list of each shipment states the real weight.
Finishes for Alabastro DI Volterra
Honed
Smooth and matt, with a soft satin look. Hides small scratches and etching better than a polish and is safer underfoot.
Sandblasted
A fine, even roughness obtained with a jet of sand. Lightens the colour and gives grip: used for exteriors, steps and pool surrounds.
Bush-hammered
A rough, pitted surface made with a toothed hammer. Maximum slip resistance for exterior paving, ramps and steps.
Natural cleft
The stone is split along its natural layers and left as it is: a lively, riven surface with excellent grip.
Care and maintenance
- Clean with water and a neutral detergent; hard stones tolerate everyday use very well.
- Sealing is quick and recommended on light colours and on honed, leathered or flamed finishes.
- Avoid waxes and film-forming products that leave a layer on the surface.
- Outdoors, an occasional wash with a pressure cleaner at moderate pressure restores the colour.
- Hot pans, knives and frost are not a problem for most stones of this family; use trivets anyway to protect sealers.
How to order
- Send sizes, thickness, finish and destination with the form.
- We reply with photos of the lots available now and a written offer.
- You approve the slabs or the block; for large projects we prepare a dry-lay.
- Cutting, finishing, quality check and packing in wooden crates or bundles.
- Shipping worldwide from Carrara, with packing list and documents.
Photos of Alabastro DI Volterra
Natural stone changes from block to block, so we photograph the lots we have in stock at the moment of your request. Send the form with your sizes and we reply with real photographs of the slabs or blocks available.
Similar stones
Other sandstone materials in beige & cream tones to compare.
More stones from Italy
Breccia Aurora · Breccia Aurora Classica · Breccia Caprara · Breccia Carsica · Breccia DI Mondragone · Breccia Pernice · Breccia Primavera · Breccia Rio Serra · Breccia Rossa · Breccia Variegata · Ceppo DI Poltragno E DI Gre · Ceppo Norico · Amelia Rose · Balma · Baveno Verde · Beola Argentata · Beola Bianca · Beola Ghiandonata · Beola Grigia · Beola Grigia Dell'ossola · Beola Grigia Lombarda · Bianco Dolomiti · Bianco Monte Carlo · Bianco Sardo · Diorite DI Malanaggio · Diorite DI Traversella · Diorite DI Vico · Dorato Valmalenco · Giallo San Giacomo · Grigio Malaga · Grigio Sardo · Grigio Sardo Champagne · New Verde Spluga · Ouincinetto · Pietra di Luserna · Porfido Valcamonica · Rosa Baveno · Rosa Sarda Limbara · Rosa Sardo Beta · Rosa Sardo Ghiandone
Shipping and returns
Shipping cost depends on weight and distance and is stated in the written offer; within Italy it starts from € 300 per shipment. Goods can be returned within 14 days: a 30% restocking fee applies and the return transport is paid by the customer. Pieces cut to size cannot be returned.
Questions and answers
Where does Alabastro DI Volterra come from?
Alabastro DI Volterra comes from Italy.
How much does a slab of Alabastro DI Volterra weigh?
A 2 cm slab of this stone family weighs about 46 kg per square metre; a 3 cm slab about 69 kg.
Is Alabastro DI Volterra suitable for kitchens and bathrooms?
Typical uses of sandstone are façades, paving, garden and landscape works. For kitchen tops we recommend a suitable finish and sealing: tell us your project and we advise the right solution.
Which finishes can I have on Alabastro DI Volterra?
The finishes normally used on this stone family are natural cleft, honed, sandblasted, bush-hammered. The finish is chosen according to where the stone goes: polished or honed indoors, textured finishes where grip is needed.
Can Alabastro DI Volterra be used outdoors?
For the sandstone family our guidance for exterior paving and façades is: excellent; for frost exposure: good. We confirm thickness and finish on your project and climate.
How do I clean and protect Alabastro DI Volterra?
Use water and a neutral detergent; sealing is quick and recommended on light colours and textured finishes.
Do slabs of Alabastro DI Volterra all look the same?
No. Natural stone changes from block to block and even within the same block. This is why we send photographs of the lots available at the moment of the offer, and book-match slabs from the same block when the design needs it.
How do I get a price for Alabastro DI Volterra?
Prices depend on the selection, thickness, finish and quantity. Send the form with your sizes: we reply with photos of the lots available and a written offer.