Travertino Rojo travertine – polished sample photo 1

Travertino Rojo travertine polished sample – Marmi di Carrara – gold, rust red (1) — Travertino Rojo travertine – polished sample photo 1. Photo © Marmi di Carrara srl.

About this photo

This photograph shows a polished sample in Travertino Rojo, a travertine from Spain. The dominant tones measured on the image are gold (40%), rust red (27%), brown (22%). Travertino Rojo belongs to the travertine family; typical uses are flooring, façades, pool surrounds, bathrooms, exterior paving.

Dominant tones

gold 40%rust red 27%brown 22%pink 11%

Tones are measured automatically on the photograph; light and screen settings change how a stone looks. Ask for current photos of the lot before deciding.

About Travertino Rojo

Travertino Rojo is a red travertine from Spain. Petrographically it is classified as travertine. Marmi di Carrara supplies it as blocks, slabs of 2 and 3 cm, tiles and cut-to-size elements, in the finishes typical of this family: honed, filled or unfilled, brushed, tumbled, polished. Typical uses: flooring, façades, pool surrounds, bathrooms, exterior paving.

Technical sheet

Indicative price	from € 145/m² · polished 2 cm slabs, ex works Carrara, VAT excluded
Material	Travertino Rojo
Stone family	Travertine
Origin	Spain
Base colour	Red
Formats available	Blocks, slabs 2 cm and 3 cm, tiles, cut-to-size
Typical finishes	Honed, filled or unfilled, brushed, tumbled, polished
Typical uses	Flooring, façades, pool surrounds, bathrooms, exterior paving
Bulk density (EN 1936)	2,300–2,600 kg/m³
Water absorption (EN 13755)	0.5–3 %
Compressive strength (EN 1926)	40–110 MPa
Flexural strength (EN 12372)	6–14 MPa
Mohs hardness	3–4
Weight of a 2 cm slab	about 49 kg/m²
Photo shows	Polished sample
Image size	1200 × 893 px

Density, absorption and strength are indicative ranges for the stone family, not test results of this block. Certified values for a specific lot are provided with the offer.

Catalogue data

Trade classification	Marble
Petrographic classification	Travertine
Notes	In Barcelona, you will see thousands of squaremeters of this material.

Ask for this stone Ask the AI

All about Travertino Rojo →

Try it in a room with the Marble Engine AI tools →

Where to use Travertino Rojo

Interior floors	Excellent
Wall cladding	Excellent
Kitchen worktops	With care
Bathrooms and wet areas	Good
Exterior paving and façades	Good
Frost exposure	With care
Back-lighting	Not suitable

General guidance for the travertine family. The right thickness, finish and treatment for Travertino Rojo are confirmed on your project.

Weights

Thickness (mm)	about 24 kg/m²
Thickness (mm)	about 49 kg/m²
Thickness (mm)	about 74 kg/m²
Thickness (mm)	about 98 kg/m²
Thickness (mm)	about 122 kg/m²
Slab 300 × 180 cm, 2 cm	about 265 kg
Slab 300 × 180 cm, 3 cm	about 397 kg
20-foot container (about 27 t)	about 550 m² of 2 cm slabs

Weights are calculated from the typical density of the stone family; the packing list of each shipment states the real weight.

Questions and answers

What is Travertino Rojo used for?

Travertino Rojo is a travertine from Spain. Typical uses are flooring, façades, pool surrounds, bathrooms, exterior paving.

Which finishes are available for Travertino Rojo?

The usual finishes for this stone family are honed, filled or unfilled, brushed, tumbled, polished. The finish is chosen according to the use and confirmed with the offer.

How much does Travertino Rojo weigh?

About 49 kg per square metre at 2 cm and 74 kg at 3 cm, calculated from the typical density of the family.

How do I look after Travertino Rojo?

Water and a neutral stone detergent, no acids or descalers, and an impregnating sealer.

Can I buy the slab shown in this photo?

Natural stone changes from block to block. Send us this photo with the form: we check the lots available now in our warehouse and reply with current photos, sizes and price.