Bad Langensalza travertine – polished sample photo 1
About this photo
This photograph shows a polished sample in Bad Langensalza, a travertine from Germany. The dominant tones measured on the image are gold (78%), rust red (22%). Bad Langensalza belongs to the travertine family; typical uses are flooring, façades, pool surrounds, bathrooms, exterior paving.
Dominant tones
Tones are measured automatically on the photograph; light and screen settings change how a stone looks. Ask for current photos of the lot before deciding.
About Bad Langensalza
Bad Langensalza is a yellow travertine from Germany. Petrographically it is classified as travertine. It is also traded as Deutscher Travertin, Thüringer Travertin Mühlhauser Travertin. Marmi di Carrara supplies it as blocks, slabs of 2 and 3 cm, tiles and cut-to-size elements, in the finishes typical of this family: honed, filled or unfilled, brushed, tumbled, polished. Typical uses: flooring, façades, pool surrounds, bathrooms, exterior paving.
Where to use Bad Langensalza
| Interior floors | Excellent |
|---|---|
| Wall cladding | Excellent |
| Kitchen worktops | With care |
| Bathrooms and wet areas | Good |
| Exterior paving and façades | Good |
| Frost exposure | With care |
| Back-lighting | Not suitable |
General guidance for the travertine family. The right thickness, finish and treatment for Bad Langensalza are confirmed on your project.
Weights
| Thickness (mm) | about 24 kg/m² |
|---|---|
| Thickness (mm) | about 49 kg/m² |
| Thickness (mm) | about 74 kg/m² |
| Thickness (mm) | about 98 kg/m² |
| Thickness (mm) | about 122 kg/m² |
| Slab 300 × 180 cm, 2 cm | about 265 kg |
| Slab 300 × 180 cm, 3 cm | about 397 kg |
| 20-foot container (about 27 t) | about 550 m² of 2 cm slabs |
Weights are calculated from the typical density of the stone family; the packing list of each shipment states the real weight.
Questions and answers
What is Bad Langensalza used for?
Bad Langensalza is a travertine from Germany. Typical uses are flooring, façades, pool surrounds, bathrooms, exterior paving.
Which finishes are available for Bad Langensalza?
The usual finishes for this stone family are honed, filled or unfilled, brushed, tumbled, polished. The finish is chosen according to the use and confirmed with the offer.
How much does Bad Langensalza weigh?
About 49 kg per square metre at 2 cm and 74 kg at 3 cm, calculated from the typical density of the family.
How do I look after Bad Langensalza?
Water and a neutral stone detergent, no acids or descalers, and an impregnating sealer.
Can I buy the slab shown in this photo?
Natural stone changes from block to block. Send us this photo with the form: we check the lots available now in our warehouse and reply with current photos, sizes and price.
