Ardosia de Valongo slate – polished sample photo 1
About this photo
This photograph shows a polished sample in Ardosia de Valongo, a slate from Portugal. The dominant tones measured on the image are beige (97%). Ardosia de Valongo belongs to the slate family; typical uses are roofing, flooring, wall cladding, tabletops.
Dominant tones
Tones are measured automatically on the photograph; light and screen settings change how a stone looks. Ask for current photos of the lot before deciding.
About Ardosia de Valongo
Ardosia de Valongo is a grey slate from Portugal. Petrographically it is classified as slate. Marmi di Carrara supplies it as blocks, slabs of 2 and 3 cm, tiles and cut-to-size elements, in the finishes typical of this family: natural cleft, honed, brushed. Recommended applications: suitable for interior and exterior applications. Blocks reach about No block trade.
Where to use Ardosia de Valongo
| Interior floors | Excellent |
|---|---|
| Wall cladding | Excellent |
| Kitchen worktops | Good |
| Bathrooms and wet areas | Excellent |
| Exterior paving and façades | Excellent |
| Frost exposure | Excellent |
| Back-lighting | Not suitable |
General guidance for the slate family. The right thickness, finish and treatment for Ardosia de Valongo are confirmed on your project.
Weights
| Thickness (mm) | about 28 kg/m² |
|---|---|
| Thickness (mm) | about 56 kg/m² |
| Thickness (mm) | about 84 kg/m² |
| Thickness (mm) | about 112 kg/m² |
| Thickness (mm) | about 140 kg/m² |
| Slab 300 × 180 cm, 2 cm | about 302 kg |
| Slab 300 × 180 cm, 3 cm | about 454 kg |
| 20-foot container (about 27 t) | about 480 m² of 2 cm slabs |
Weights are calculated from the typical density of the stone family; the packing list of each shipment states the real weight.
Questions and answers
What is Ardosia de Valongo used for?
Ardosia de Valongo is a slate from Portugal. Typical uses are roofing, flooring, wall cladding, tabletops.
Which finishes are available for Ardosia de Valongo?
The usual finishes for this stone family are natural cleft, honed, brushed. The finish is chosen according to the use and confirmed with the offer.
How much does Ardosia de Valongo weigh?
About 56 kg per square metre at 2 cm and 84 kg at 3 cm, calculated from the typical density of the family.
How do I look after Ardosia de Valongo?
Water and a neutral detergent; sealing is recommended on light colours and textured finishes.
Can I buy the slab shown in this photo?
Natural stone changes from block to block. Send us this photo with the form: we check the lots available now in our warehouse and reply with current photos, sizes and price.
