Ardesia Multicor slate – polished sample photo 1

Ardesia Multicor slate polished sample – Marmi di Carrara – charcoal, black (1) — Ardesia Multicor slate – polished sample photo 1. Photo © Marmi di Carrara srl.

About this photo

This photograph shows a polished sample in Ardesia Multicor, a slate from Brazil. The dominant tones measured on the image are charcoal (77%), black (23%). Ardesia Multicor belongs to the slate family; typical uses are roofing, flooring, wall cladding, tabletops.

Dominant tones

charcoal 77%black 23%

Tones are measured automatically on the photograph; light and screen settings change how a stone looks. Ask for current photos of the lot before deciding.

About Ardesia Multicor

Ardesia Multicor is a grey slate from Brazil. Petrographically it is classified as slate. Texture: fine. It is also traded as MC Slate, Multicolor Slate. Marmi di Carrara supplies it as blocks, slabs of 2 and 3 cm, tiles and cut-to-size elements, in the finishes typical of this family: natural cleft, honed, brushed. Recommended applications: suitable for interior and exterior applications.

Technical sheet

Material	Ardesia Multicor
Stone family	Slate
Origin	Brazil
Base colour	Grey
Formats available	Blocks, slabs 2 cm and 3 cm, tiles, cut-to-size
Typical finishes	Natural cleft, honed, brushed
Typical uses	Roofing, flooring, wall cladding, tabletops
Bulk density (EN 1936)	2,700–2,900 kg/m³
Water absorption (EN 13755)	0.1–0.5 %
Compressive strength (EN 1926)	100–200 MPa
Flexural strength (EN 12372)	25–60 MPa
Mohs hardness	3–5
Weight of a 2 cm slab	about 56 kg/m²
Photo shows	Polished sample
Image size	1200 × 900 px

Density, absorption and strength are indicative ranges for the stone family, not test results of this block. Certified values for a specific lot are provided with the offer.

Catalogue data

Also known as	MC Slate, Multicolor Slate
Trade classification	Other
Petrographic classification	Slate
Texture and grain	fine
Recommended applications	Suitable for interior and exterior applications

Ask for this stone Ask the AI

All about Ardesia Multicor →

Try it in a room with the Marble Engine AI tools →

Where to use Ardesia Multicor

Interior floors	Excellent
Wall cladding	Excellent
Kitchen worktops	Good
Bathrooms and wet areas	Excellent
Exterior paving and façades	Excellent
Frost exposure	Excellent
Back-lighting	Not suitable

General guidance for the slate family. The right thickness, finish and treatment for Ardesia Multicor are confirmed on your project.

Weights

Thickness (mm)	about 28 kg/m²
Thickness (mm)	about 56 kg/m²
Thickness (mm)	about 84 kg/m²
Thickness (mm)	about 112 kg/m²
Thickness (mm)	about 140 kg/m²
Slab 300 × 180 cm, 2 cm	about 302 kg
Slab 300 × 180 cm, 3 cm	about 454 kg
20-foot container (about 27 t)	about 480 m² of 2 cm slabs

Weights are calculated from the typical density of the stone family; the packing list of each shipment states the real weight.

Questions and answers

What is Ardesia Multicor used for?

Ardesia Multicor is a slate from Brazil. Typical uses are roofing, flooring, wall cladding, tabletops.

Which finishes are available for Ardesia Multicor?

The usual finishes for this stone family are natural cleft, honed, brushed. The finish is chosen according to the use and confirmed with the offer.

How much does Ardesia Multicor weigh?

About 56 kg per square metre at 2 cm and 84 kg at 3 cm, calculated from the typical density of the family.

How do I look after Ardesia Multicor?

Water and a neutral detergent; sealing is recommended on light colours and textured finishes.

Can I buy the slab shown in this photo?

Natural stone changes from block to block. Send us this photo with the form: we check the lots available now in our warehouse and reply with current photos, sizes and price.