Venatino
Marble · Apuan Alps, Tuscany, Italy · 6 photos
In brief. Venatino is a white marble from Apuan Alps, Tuscany, Italy. Marmi di Carrara supplies it as blocks, slabs of 2 and 3 cm, tiles and cut-to-size elements, in the finishes typical of this family: polished, honed, brushed, sandblasted, bush-hammered. Typical uses: flooring, wall cladding, bathrooms, vanity and kitchen tops, stairs, fireplaces, sculpture. Indicative price: from € 157/m² · polished 2 cm slabs, ex works Carrara, VAT excluded.
AboutTechnical sheetWhere to use itFinishesWeightsCarePhotosFAQ
About Venatino
A white Carrara marble with thin, clearly drawn grey veins, more linear than those of Bianco Carrara. It reads as elegant and orderly on floors, stairs and wall panels.
Dominant tones measured on our photo
From our quarries
Introduction
White marble with fine, dense and regular grey veining: livelier than Bianco Carrara and more delicate than Venato. Quarried in our Fondone quarries at Forno di Massa.
Geology
Fine-grained marble of the Apuan Alps, Fondone basin (upper Frigido valley); light white-grey ground with thin grey veins due to pyrite and accessory minerals. Typical density 2,700 kg/m³, water absorption 0.1-0.2%.
Uses
Interior floors and walls, bathrooms, stairs, honed kitchens, tiles and cut-to-size work; suited to large surfaces with a uniform pattern.
Selection
Selected by fineness and regularity of the veining; 2 and 3 cm polished or honed slabs, tiles, blocks on request.
Price
Marble band: indicative 80-170 €/m² for 2 cm polished slabs, excl. VAT, ex works Carrara.
Bacino di Fondone (Forno, Massa)
Marble basin at Forno, in the municipality of Massa, in the upper Frigido valley. Our Fondone quarries yield Calacatta Luccicoso, Venatino and Bardiglio Imperiale.
Where to use Venatino
| Interior floors | Excellent |
|---|---|
| Wall cladding | Excellent |
| Kitchen worktops | With care |
| Bathrooms and wet areas | Excellent |
| Exterior paving and façades | Good |
| Frost exposure | With care |
| Back-lighting | Limited |
General guidance for the marble family. The right thickness, finish and treatment for Venatino are confirmed on your project.
Weights and logistics
| Thickness (mm) | about 27 kg/m² |
|---|---|
| Thickness (mm) | about 54 kg/m² |
| Thickness (mm) | about 81 kg/m² |
| Thickness (mm) | about 108 kg/m² |
| Thickness (mm) | about 135 kg/m² |
| Slab 300 × 180 cm, 2 cm | about 292 kg |
| Slab 300 × 180 cm, 3 cm | about 437 kg |
| 20-foot container (about 27 t) | about 500 m² of 2 cm slabs |
Weights are calculated from the typical density of the stone family; the packing list of each shipment states the real weight.
Finishes for Venatino
Polished
Mirror-like gloss that brings out colour and veining at full depth. The classic choice for walls, tops and interior floors; slippery when wet.
Honed
Smooth and matt, with a soft satin look. Hides small scratches and etching better than a polish and is safer underfoot.
Brushed
Worked with abrasive brushes for a slightly undulating, silky surface that follows the grain of the stone. Warm to the touch and easy to live with.
Sandblasted
A fine, even roughness obtained with a jet of sand. Lightens the colour and gives grip: used for exteriors, steps and pool surrounds.
Bush-hammered
A rough, pitted surface made with a toothed hammer. Maximum slip resistance for exterior paving, ramps and steps.
Care and maintenance
- Clean with water and a neutral detergent made for natural stone; rinse and dry.
- Avoid acids and descalers (vinegar, lemon, anti-limescale sprays): they etch calcite and dull a polished surface.
- Seal with an impregnating protector after laying and repeat when water no longer beads, typically every 1–3 years on tops.
- Wipe wine, coffee, oil and citrus juice straight away, especially on kitchen and vanity tops.
- A dulled or scratched surface can be re-honed or re-polished on site: the stone is the same through its whole thickness.
How to order
- Send sizes, thickness, finish and destination with the form.
- We reply with photos of the lots available now and a written offer.
- You approve the slabs or the block; for large projects we prepare a dry-lay.
- Cutting, finishing, quality check and packing in wooden crates or bundles.
- Shipping worldwide from Carrara, with packing list and documents.
Venatino photo gallery
Every photo has its own page with tones, details and technical sheet.
Similar stones
Other marble materials in white tones to compare.
More stones from Apuan Alps, Tuscany, Italy
Arabescato · Arabescato Corchia · Arabescato Vagli · Bardiglio · Bardiglio Imperiale · Bianco Carrara · Bianco Carrara C · Bianco Carrara CD · Bianco Gioia · Calacatta · Calacatta Carrara · Calacatta Gold · Calacatta Oro · Calacatta Vagli · Cipollino · Cremo Delicato · Paonazzo · Statuarietto · Statuario · Statuario Extra · Zebrino
Shipping and returns
Shipping cost depends on weight and distance and is stated in the written offer; within Italy it starts from € 300 per shipment. Goods can be returned within 14 days: a 30% restocking fee applies and the return transport is paid by the customer. Pieces cut to size cannot be returned.
Questions and answers
Where does Venatino come from?
Venatino comes from Apuan Alps, Tuscany, Italy. It is one of the marbles of the Apuan Alps, the mountains behind Carrara.
How much does a slab of Venatino weigh?
A 2 cm slab of this stone family weighs about 54 kg per square metre; a 3 cm slab about 81 kg.
Is Venatino suitable for kitchens and bathrooms?
Typical uses of marble are flooring, wall cladding, bathrooms, vanity and kitchen tops, stairs, fireplaces, sculpture. For kitchen tops we recommend a suitable finish and sealing: tell us your project and we advise the right solution.
Which finishes can I have on Venatino?
The finishes normally used on this stone family are polished, honed, brushed, sandblasted, bush-hammered. The finish is chosen according to where the stone goes: polished or honed indoors, textured finishes where grip is needed.
Can Venatino be used outdoors?
For the marble family our guidance for exterior paving and façades is: good; for frost exposure: with care. We confirm thickness and finish on your project and climate.
How do I clean and protect Venatino?
Use water and a neutral stone detergent, avoid acids and descalers, and seal the surface with an impregnating protector.
Do slabs of Venatino all look the same?
No. Natural stone changes from block to block and even within the same block. This is why we send photographs of the lots available at the moment of the offer, and book-match slabs from the same block when the design needs it.
How much does Venatino cost per m²?
Indicative price from € 157/m² for polished 2 cm slabs, ex works Carrara, VAT excluded. The final figure depends on selection, thickness, finish and quantity: send the form with your sizes and we reply with photos of the lots available and a written offer.