Worzeldorfer Sandstein sandstone – polished sample photo 1

Worzeldorfer Sandstein sandstone polished sample – Marmi di Carrara – brown (1) — Worzeldorfer Sandstein sandstone – polished sample photo 1. Photo © Marmi di Carrara srl.

About this photo

This photograph shows a polished sample in Worzeldorfer Sandstein, a sandstone from Germany. The dominant tones measured on the image are brown (100%). Worzeldorfer Sandstein belongs to the sandstone family; typical uses are façades, paving, garden and landscape works.

Dominant tones

brown 100%

Tones are measured automatically on the photograph; light and screen settings change how a stone looks. Ask for current photos of the lot before deciding.

About Worzeldorfer Sandstein

Worzeldorfer Sandstein is a red sandstone from Germany. Petrographically it is classified as sandstone. Texture: medium. It is also traded as Nürnberger Quarzit, Worzeldorfer Quarzit, Worzeldorfer Quarzitsandstein. Marmi di Carrara supplies it as blocks, slabs of 2 and 3 cm, tiles and cut-to-size elements, in the finishes typical of this family: natural cleft, honed, sandblasted, bush-hammered. Recommended applications: suitable for interior and exterior applications. Blocks reach about n.a..

Technical sheet

Material	Worzeldorfer Sandstein
Stone family	Sandstone
Origin	Germany
Base colour	Red
Formats available	Blocks, slabs 2 cm and 3 cm, tiles, cut-to-size
Typical finishes	Natural cleft, honed, sandblasted, bush-hammered
Typical uses	Façades, paving, garden and landscape works
Bulk density (EN 1936)	2,000–2,600 kg/m³
Water absorption (EN 13755)	1–8 %
Compressive strength (EN 1926)	30–150 MPa
Flexural strength (EN 12372)	3–15 MPa
Mohs hardness	6–7
Weight of a 2 cm slab	about 46 kg/m²
Photo shows	Polished sample
Image size	1200 × 900 px

Density, absorption and strength are indicative ranges for the stone family, not test results of this block. Certified values for a specific lot are provided with the offer.

Catalogue data

Also known as	Nürnberger Quarzit, Worzeldorfer Quarzit, Worzeldorfer Quarzitsandstein
Trade classification	Other
Petrographic classification	Sandstone
Texture and grain	medium
Recommended applications	Suitable for interior and exterior applications
Maximum block size	n.a.

Ask for this stone Ask the AI

All about Worzeldorfer Sandstein →

Try it in a room with the Marble Engine AI tools →

Where to use Worzeldorfer Sandstein

Interior floors	Good
Wall cladding	Good
Kitchen worktops	Not recommended
Bathrooms and wet areas	With care
Exterior paving and façades	Excellent
Frost exposure	Good
Back-lighting	Not suitable

General guidance for the sandstone family. The right thickness, finish and treatment for Worzeldorfer Sandstein are confirmed on your project.

Weights

Thickness (mm)	about 23 kg/m²
Thickness (mm)	about 46 kg/m²
Thickness (mm)	about 69 kg/m²
Thickness (mm)	about 92 kg/m²
Thickness (mm)	about 115 kg/m²
Slab 300 × 180 cm, 2 cm	about 248 kg
Slab 300 × 180 cm, 3 cm	about 373 kg
20-foot container (about 27 t)	about 590 m² of 2 cm slabs

Weights are calculated from the typical density of the stone family; the packing list of each shipment states the real weight.

Questions and answers

What is Worzeldorfer Sandstein used for?

Worzeldorfer Sandstein is a sandstone from Germany. Typical uses are façades, paving, garden and landscape works.

Which finishes are available for Worzeldorfer Sandstein?

The usual finishes for this stone family are natural cleft, honed, sandblasted, bush-hammered. The finish is chosen according to the use and confirmed with the offer.

How much does Worzeldorfer Sandstein weigh?

About 46 kg per square metre at 2 cm and 69 kg at 3 cm, calculated from the typical density of the family.

How do I look after Worzeldorfer Sandstein?

Water and a neutral detergent; sealing is recommended on light colours and textured finishes.

Can I buy the slab shown in this photo?

Natural stone changes from block to block. Send us this photo with the form: we check the lots available now in our warehouse and reply with current photos, sizes and price.