Tandur Blue Natural limestone – polished sample photo 1

Tandur Blue Natural limestone polished sample – Marmi di Carrara – light grey, grey (1) — Tandur Blue Natural limestone – polished sample photo 1. Photo © Marmi di Carrara srl.

About this photo

This photograph shows a polished sample in Tandur Blue Natural, a limestone from India. The dominant tones measured on the image are light grey (78%), grey (22%). Tandur Blue Natural belongs to the limestone family; typical uses are flooring, wall cladding, façades, architectural elements.

Dominant tones

light grey 78%grey 22%

Tones are measured automatically on the photograph; light and screen settings change how a stone looks. Ask for current photos of the lot before deciding.

About Tandur Blue Natural

Tandur Blue Natural is a grey limestone from India. Petrographically it is classified as limestone. Texture: fine. Marmi di Carrara supplies it as blocks, slabs of 2 and 3 cm, tiles and cut-to-size elements, in the finishes typical of this family: honed, brushed, tumbled, sandblasted. Recommended applications: suitable for interior and exterior applications.

Technical sheet

Indicative price	from € 105/m² · polished 2 cm slabs, ex works Carrara, VAT excluded
Material	Tandur Blue Natural
Stone family	Limestone
Origin	India
Base colour	Grey
Formats available	Blocks, slabs 2 cm and 3 cm, tiles, cut-to-size
Typical finishes	Honed, brushed, tumbled, sandblasted
Typical uses	Flooring, wall cladding, façades, architectural elements
Bulk density (EN 1936)	2,300–2,700 kg/m³
Water absorption (EN 13755)	0.3–5 %
Compressive strength (EN 1926)	30–150 MPa
Flexural strength (EN 12372)	5–15 MPa
Mohs hardness	3–4
Weight of a 2 cm slab	about 50 kg/m²
Photo shows	Polished sample
Image size	1200 × 900 px

Density, absorption and strength are indicative ranges for the stone family, not test results of this block. Certified values for a specific lot are provided with the offer.

Catalogue data

Trade classification	Other
Petrographic classification	Limestone
Texture and grain	fine
Recommended applications	Suitable for interior and exterior applications
Availability	good

Ask for this stone Ask the AI

All about Tandur Blue Natural →

Try it in a room with the Marble Engine AI tools →

Where to use Tandur Blue Natural

Interior floors	Good
Wall cladding	Excellent
Kitchen worktops	With care
Bathrooms and wet areas	Good
Exterior paving and façades	Good
Frost exposure	With care
Back-lighting	Not suitable

General guidance for the limestone family. The right thickness, finish and treatment for Tandur Blue Natural are confirmed on your project.

Weights

Thickness (mm)	about 25 kg/m²
Thickness (mm)	about 50 kg/m²
Thickness (mm)	about 75 kg/m²
Thickness (mm)	about 100 kg/m²
Thickness (mm)	about 125 kg/m²
Slab 300 × 180 cm, 2 cm	about 270 kg
Slab 300 × 180 cm, 3 cm	about 405 kg
20-foot container (about 27 t)	about 540 m² of 2 cm slabs

Weights are calculated from the typical density of the stone family; the packing list of each shipment states the real weight.

Questions and answers

What is Tandur Blue Natural used for?

Tandur Blue Natural is a limestone from India. Typical uses are flooring, wall cladding, façades, architectural elements.

Which finishes are available for Tandur Blue Natural?

The usual finishes for this stone family are honed, brushed, tumbled, sandblasted. The finish is chosen according to the use and confirmed with the offer.

How much does Tandur Blue Natural weigh?

About 50 kg per square metre at 2 cm and 75 kg at 3 cm, calculated from the typical density of the family.

How do I look after Tandur Blue Natural?

Water and a neutral stone detergent, no acids or descalers, and an impregnating sealer.

Can I buy the slab shown in this photo?

Natural stone changes from block to block. Send us this photo with the form: we check the lots available now in our warehouse and reply with current photos, sizes and price.