Statuario Extra marble – slab surface photo 69

Statuario Extra marble slab surface – Marmi di Carrara – grey, green (69) — Statuario Extra marble – slab surface photo 69. Photo © Marmi di Carrara srl.

About this photo

This photograph shows a slab surface in Statuario Extra, a marble from Apuan Alps, Tuscany, Italy. The dominant tones measured on the image are grey (52%), green (23%), beige (15%). The top selection of Statuario: the whitest, most compact ground with a few bold, clean grey veins. Blocks of this grade are rare and are chosen one by one in the quarry for sculpture, book-matched walls and the most prestigious interiors.

Dominant tones

grey 52%green 23%beige 15%ivory 10%

Tones are measured automatically on the photograph; light and screen settings change how a stone looks. Ask for current photos of the lot before deciding.

About Statuario Extra

Statuario Extra is a white marble from Apuan Alps, Tuscany, Italy. Marmi di Carrara supplies it as blocks, slabs of 2 and 3 cm, tiles and cut-to-size elements, in the finishes typical of this family: polished, honed, brushed, sandblasted, bush-hammered. Typical uses: flooring, wall cladding, bathrooms, vanity and kitchen tops, stairs, fireplaces, sculpture.

Technical sheet

Indicative price	from € 900/m² · polished 2 cm slabs, ex works Carrara, VAT excluded
Material	Statuario Extra
Stone family	Marble
Origin	Apuan Alps, Tuscany, Italy
Base colour	White
Formats available	Blocks, slabs 2 cm and 3 cm, tiles, cut-to-size
Typical finishes	Polished, honed, brushed, sandblasted, bush-hammered
Typical uses	Flooring, wall cladding, bathrooms, vanity and kitchen tops, stairs, fireplaces, sculpture
Bulk density (EN 1936)	2,650–2,750 kg/m³
Water absorption (EN 13755)	0.1–0.6 %
Compressive strength (EN 1926)	70–140 MPa
Flexural strength (EN 12372)	7–20 MPa
Mohs hardness	3–4
Weight of a 2 cm slab	about 54 kg/m²
Photo shows	Slab surface
Image size	1200 × 800 px

Density, absorption and strength are indicative ranges for the stone family, not test results of this block. Certified values for a specific lot are provided with the offer.

Ask for this stone Ask the AI

All about Statuario Extra →

Try it in a room with the Marble Engine AI tools →

Where to use Statuario Extra

Interior floors	Excellent
Wall cladding	Excellent
Kitchen worktops	With care
Bathrooms and wet areas	Excellent
Exterior paving and façades	Good
Frost exposure	With care
Back-lighting	Limited

General guidance for the marble family. The right thickness, finish and treatment for Statuario Extra are confirmed on your project.

Weights

Thickness (mm)	about 27 kg/m²
Thickness (mm)	about 54 kg/m²
Thickness (mm)	about 81 kg/m²
Thickness (mm)	about 108 kg/m²
Thickness (mm)	about 135 kg/m²
Slab 300 × 180 cm, 2 cm	about 292 kg
Slab 300 × 180 cm, 3 cm	about 437 kg
20-foot container (about 27 t)	about 500 m² of 2 cm slabs

Weights are calculated from the typical density of the stone family; the packing list of each shipment states the real weight.

Questions and answers

What is Statuario Extra used for?

Statuario Extra is a marble from Apuan Alps, Tuscany, Italy. Typical uses are flooring, wall cladding, bathrooms, vanity and kitchen tops, stairs, fireplaces, sculpture.

Which finishes are available for Statuario Extra?

The usual finishes for this stone family are polished, honed, brushed, sandblasted, bush-hammered. The finish is chosen according to the use and confirmed with the offer.

How much does Statuario Extra weigh?

About 54 kg per square metre at 2 cm and 81 kg at 3 cm, calculated from the typical density of the family.

How do I look after Statuario Extra?

Water and a neutral stone detergent, no acids or descalers, and an impregnating sealer.

Can I buy the slab shown in this photo?

Natural stone changes from block to block. Send us this photo with the form: we check the lots available now in our warehouse and reply with current photos, sizes and price.