Quarzite Perola quartzite – polished sample photo 1

Quarzite Perola quartzite polished sample – Marmi di Carrara – grey, light grey (1) — Quarzite Perola quartzite – polished sample photo 1. Photo © Marmi di Carrara srl.

About this photo

This photograph shows a polished sample in Quarzite Perola, a quartzite from Brazil. The dominant tones measured on the image are grey (83%), light grey (17%). Quarzite Perola belongs to the quartzite family; typical uses are kitchen worktops, feature walls, flooring, exterior cladding.

Dominant tones

grey 83%light grey 17%

Tones are measured automatically on the photograph; light and screen settings change how a stone looks. Ask for current photos of the lot before deciding.

About Quarzite Perola

Quarzite Perola is a grey quartzite from Brazil. Petrographically it is classified as quartzite. Texture: veined. It is also traded as Cuartezito Perola. Marmi di Carrara supplies it as blocks, slabs of 2 and 3 cm, tiles and cut-to-size elements, in the finishes typical of this family: polished, honed, leathered. Recommended applications: suitable for interior and exterior applications.

Technical sheet

Material	Quarzite Perola
Stone family	Quartzite
Origin	Brazil
Base colour	Grey
Formats available	Blocks, slabs 2 cm and 3 cm, tiles, cut-to-size
Typical finishes	Polished, honed, leathered
Typical uses	Kitchen worktops, feature walls, flooring, exterior cladding
Bulk density (EN 1936)	2,600–2,750 kg/m³
Water absorption (EN 13755)	0.1–0.5 %
Compressive strength (EN 1926)	120–300 MPa
Flexural strength (EN 12372)	10–30 MPa
Mohs hardness	7
Weight of a 2 cm slab	about 54 kg/m²
Photo shows	Polished sample
Image size	1200 × 900 px

Density, absorption and strength are indicative ranges for the stone family, not test results of this block. Certified values for a specific lot are provided with the offer.

Catalogue data

Also known as	Cuartezito Perola
Trade classification	Other
Petrographic classification	Quartzite
Texture and grain	veined
Recommended applications	Suitable for interior and exterior applications

Ask for this stone Ask the AI

All about Quarzite Perola →

Try it in a room with the Marble Engine AI tools →

Where to use Quarzite Perola

Interior floors	Excellent
Wall cladding	Excellent
Kitchen worktops	Excellent
Bathrooms and wet areas	Excellent
Exterior paving and façades	Excellent
Frost exposure	Excellent
Back-lighting	Limited

General guidance for the quartzite family. The right thickness, finish and treatment for Quarzite Perola are confirmed on your project.

Weights

Thickness (mm)	about 27 kg/m²
Thickness (mm)	about 54 kg/m²
Thickness (mm)	about 81 kg/m²
Thickness (mm)	about 108 kg/m²
Thickness (mm)	about 135 kg/m²
Slab 300 × 180 cm, 2 cm	about 292 kg
Slab 300 × 180 cm, 3 cm	about 437 kg
20-foot container (about 27 t)	about 500 m² of 2 cm slabs

Weights are calculated from the typical density of the stone family; the packing list of each shipment states the real weight.

Questions and answers

What is Quarzite Perola used for?

Quarzite Perola is a quartzite from Brazil. Typical uses are kitchen worktops, feature walls, flooring, exterior cladding.

Which finishes are available for Quarzite Perola?

The usual finishes for this stone family are polished, honed, leathered. The finish is chosen according to the use and confirmed with the offer.

How much does Quarzite Perola weigh?

About 54 kg per square metre at 2 cm and 81 kg at 3 cm, calculated from the typical density of the family.

How do I look after Quarzite Perola?

Water and a neutral detergent; sealing is recommended on light colours and textured finishes.

Can I buy the slab shown in this photo?

Natural stone changes from block to block. Send us this photo with the form: we check the lots available now in our warehouse and reply with current photos, sizes and price.