Orange Onyx onyx – slab surface photo 2
About this photo
This photograph shows a slab surface in Orange Onyx, a onyx. The dominant tones measured on the image are rust red (41%), black (27%), brown (21%). Orange Onyx belongs to the onyx family; typical uses are feature walls, back-lit panels, bar counters, vanity tops, luxury interiors.
Dominant tones
Tones are measured automatically on the photograph; light and screen settings change how a stone looks. Ask for current photos of the lot before deciding.
About Orange Onyx
Orange Onyx is a onyx. Marmi di Carrara supplies it as blocks, slabs of 2 and 3 cm, tiles and cut-to-size elements, in the finishes typical of this family: polished, honed; often back-lit. Typical uses: feature walls, back-lit panels, bar counters, vanity tops, luxury interiors.
Where to use Orange Onyx
| Interior floors | With care |
|---|---|
| Wall cladding | Excellent |
| Kitchen worktops | With care |
| Bathrooms and wet areas | Good |
| Exterior paving and façades | Not recommended |
| Frost exposure | Not recommended |
| Back-lighting | Excellent |
General guidance for the onyx family. The right thickness, finish and treatment for Orange Onyx are confirmed on your project.
Weights
| Thickness (mm) | about 27 kg/m² |
|---|---|
| Thickness (mm) | about 54 kg/m² |
| Thickness (mm) | about 81 kg/m² |
| Thickness (mm) | about 108 kg/m² |
| Thickness (mm) | about 135 kg/m² |
| Slab 300 × 180 cm, 2 cm | about 292 kg |
| Slab 300 × 180 cm, 3 cm | about 437 kg |
| 20-foot container (about 27 t) | about 500 m² of 2 cm slabs |
Weights are calculated from the typical density of the stone family; the packing list of each shipment states the real weight.
Questions and answers
What is Orange Onyx used for?
Orange Onyx is a onyx. Typical uses are feature walls, back-lit panels, bar counters, vanity tops, luxury interiors.
Which finishes are available for Orange Onyx?
The usual finishes for this stone family are polished, honed; often back-lit. The finish is chosen according to the use and confirmed with the offer.
How much does Orange Onyx weigh?
About 54 kg per square metre at 2 cm and 81 kg at 3 cm, calculated from the typical density of the family.
How do I look after Orange Onyx?
Water and a neutral stone detergent, no acids or descalers, and an impregnating sealer.
Can I buy the slab shown in this photo?
Natural stone changes from block to block. Send us this photo with the form: we check the lots available now in our warehouse and reply with current photos, sizes and price.
