Lipasvaaran Vihreä serpentinite – polished sample photo 1

Lipasvaaran Vihreä serpentinite polished sample – Marmi di Carrara – grey, green (1) — Lipasvaaran Vihreä serpentinite – polished sample photo 1. Photo © Marmi di Carrara srl.

About this photo

This photograph shows a polished sample in Lipasvaaran Vihreä, a serpentinite from Finland. The dominant tones measured on the image are grey (41%), green (28%), charcoal (21%). Lipasvaaran Vihreä belongs to the serpentinite family; typical uses are flooring, cladding, decorative elements, inlays.

Dominant tones

grey 41%green 28%charcoal 21%beige 10%

Tones are measured automatically on the photograph; light and screen settings change how a stone looks. Ask for current photos of the lot before deciding.

About Lipasvaaran Vihreä

Lipasvaaran Vihreä is a green serpentinite from Finland. Petrographically it is classified as serpentinite. Texture: veined. Marmi di Carrara supplies it as blocks, slabs of 2 and 3 cm, tiles and cut-to-size elements, in the finishes typical of this family: polished, honed. Typical uses: flooring, cladding, decorative elements, inlays. Blocks reach about 250 × 140 cm.

Technical sheet

Indicative price	from € 110/m² · polished 2 cm slabs, ex works Carrara, VAT excluded
Material	Lipasvaaran Vihreä
Stone family	Serpentinite
Origin	Finland
Base colour	Green
Formats available	Blocks, slabs 2 cm and 3 cm, tiles, cut-to-size
Typical finishes	Polished, honed
Typical uses	Flooring, cladding, decorative elements, inlays
Bulk density (EN 1936)	2,600–2,800 kg/m³
Water absorption (EN 13755)	0.1–0.6 %
Compressive strength (EN 1926)	80–200 MPa
Flexural strength (EN 12372)	10–30 MPa
Mohs hardness	3–5
Weight of a 2 cm slab	about 54 kg/m²
Photo shows	Polished sample
Image size	1200 × 900 px

Density, absorption and strength are indicative ranges for the stone family, not test results of this block. Certified values for a specific lot are provided with the offer.

Catalogue data

Trade classification	Marble
Petrographic classification	Serpentinite
Texture and grain	veined
Maximum block size	250 × 140 cm
Notes	A serpentinite.

Ask for this stone Ask the AI

All about Lipasvaaran Vihreä →

Try it in a room with the Marble Engine AI tools →

Where to use Lipasvaaran Vihreä

Interior floors	Good
Wall cladding	Excellent
Kitchen worktops	With care
Bathrooms and wet areas	Good
Exterior paving and façades	With care
Frost exposure	With care
Back-lighting	Not suitable

General guidance for the serpentinite family. The right thickness, finish and treatment for Lipasvaaran Vihreä are confirmed on your project.

Weights

Thickness (mm)	about 27 kg/m²
Thickness (mm)	about 54 kg/m²
Thickness (mm)	about 81 kg/m²
Thickness (mm)	about 108 kg/m²
Thickness (mm)	about 135 kg/m²
Slab 300 × 180 cm, 2 cm	about 292 kg
Slab 300 × 180 cm, 3 cm	about 437 kg
20-foot container (about 27 t)	about 500 m² of 2 cm slabs

Weights are calculated from the typical density of the stone family; the packing list of each shipment states the real weight.

Questions and answers

What is Lipasvaaran Vihreä used for?

Lipasvaaran Vihreä is a serpentinite from Finland. Typical uses are flooring, cladding, decorative elements, inlays.

Which finishes are available for Lipasvaaran Vihreä?

The usual finishes for this stone family are polished, honed. The finish is chosen according to the use and confirmed with the offer.

How much does Lipasvaaran Vihreä weigh?

About 54 kg per square metre at 2 cm and 81 kg at 3 cm, calculated from the typical density of the family.

How do I look after Lipasvaaran Vihreä?

Water and a neutral stone detergent, no acids or descalers, and an impregnating sealer.

Can I buy the slab shown in this photo?

Natural stone changes from block to block. Send us this photo with the form: we check the lots available now in our warehouse and reply with current photos, sizes and price.