Lasa Bianco Vena d´Oro marble – polished sample photo 1

Lasa Bianco Vena d´Oro marble polished sample – Marmi di Carrara – white (1)
Lasa Bianco Vena d´Oro marble – polished sample photo 1. Photo © Marmi di Carrara srl.

About this photo

This photograph shows a polished sample in Lasa Bianco Vena d´Oro, a marble from Italy. The dominant tones measured on the image are white (100%). Lasa Bianco Vena d´Oro belongs to the marble family; typical uses are flooring, wall cladding, bathrooms, vanity and kitchen tops, stairs, fireplaces, sculpture.

Dominant tones

white 100%

Tones are measured automatically on the photograph; light and screen settings change how a stone looks. Ask for current photos of the lot before deciding.

About Lasa Bianco Vena d´Oro

Lasa Bianco Vena d´Oro is a white marble from Italy. Petrographically it is classified as marble. Texture: fine. It is also traded as Vena Oro. Marmi di Carrara supplies it as blocks, slabs of 2 and 3 cm, tiles and cut-to-size elements, in the finishes typical of this family: polished, honed, brushed, sandblasted, bush-hammered. Typical uses: flooring, wall cladding, bathrooms, vanity and kitchen tops, stairs, fireplaces, sculpture. Blocks reach about 230 × 120 cm.

Where to use Lasa Bianco Vena d´Oro

Interior floorsExcellent
Wall claddingExcellent
Kitchen worktopsWith care
Bathrooms and wet areasExcellent
Exterior paving and façadesGood
Frost exposureWith care
Back-lightingLimited

General guidance for the marble family. The right thickness, finish and treatment for Lasa Bianco Vena d´Oro are confirmed on your project.

Weights

Thickness (mm)about 27 kg/m²
Thickness (mm)about 54 kg/m²
Thickness (mm)about 81 kg/m²
Thickness (mm)about 108 kg/m²
Thickness (mm)about 135 kg/m²
Slab 300 × 180 cm, 2 cmabout 292 kg
Slab 300 × 180 cm, 3 cmabout 437 kg
20-foot container (about 27 t)about 500 m² of 2 cm slabs

Weights are calculated from the typical density of the stone family; the packing list of each shipment states the real weight.

Questions and answers

What is Lasa Bianco Vena d´Oro used for?

Lasa Bianco Vena d´Oro is a marble from Italy. Typical uses are flooring, wall cladding, bathrooms, vanity and kitchen tops, stairs, fireplaces, sculpture.

Which finishes are available for Lasa Bianco Vena d´Oro?

The usual finishes for this stone family are polished, honed, brushed, sandblasted, bush-hammered. The finish is chosen according to the use and confirmed with the offer.

How much does Lasa Bianco Vena d´Oro weigh?

About 54 kg per square metre at 2 cm and 81 kg at 3 cm, calculated from the typical density of the family.

How do I look after Lasa Bianco Vena d´Oro?

Water and a neutral stone detergent, no acids or descalers, and an impregnating sealer.

Can I buy the slab shown in this photo?

Natural stone changes from block to block. Send us this photo with the form: we check the lots available now in our warehouse and reply with current photos, sizes and price.

More photos

See Lasa Bianco Vena d´Oro in your own room with the Marble Engine

Virtual mock-ups of floors, kitchens, bathrooms, walls and stairs, slab layout, quantity and weight calculators and more: tradition, quality and technology from Marmi di Carrara.

Open the Marble Engine Request a quote