Emerald Pearl granite – polished sample photo 3
About this photo
This photograph shows a polished sample in Emerald Pearl, a granite from Norway. The dominant tones measured on the image are black (92%), charcoal (8%). Emerald Pearl belongs to the granite family; typical uses are kitchen worktops, exterior paving and cladding, stairs, high-traffic floors.
Dominant tones
Tones are measured automatically on the photograph; light and screen settings change how a stone looks. Ask for current photos of the lot before deciding.
About Emerald Pearl
Emerald Pearl is a green granite from Norway. Petrographically it is classified as anorthosite. Texture: coarse grained. It is also traded as Labrador Emerald Pearl, Labrador Grün, Labrador Oscuro, Labrador Scuro, Labrador Verde, Ala de moscas oscuro. Marmi di Carrara supplies it as blocks, slabs of 2 and 3 cm, tiles and cut-to-size elements, in the finishes typical of this family: polished, honed, flamed, leathered, bush-hammered. Recommended applications: suitable for interior and exterior applications. Blocks reach about 290 × 130 cm.
Where to use Emerald Pearl
| Interior floors | Excellent |
|---|---|
| Wall cladding | Excellent |
| Kitchen worktops | Excellent |
| Bathrooms and wet areas | Excellent |
| Exterior paving and façades | Excellent |
| Frost exposure | Excellent |
| Back-lighting | Not suitable |
General guidance for the granite family. The right thickness, finish and treatment for Emerald Pearl are confirmed on your project.
Weights
| Thickness (mm) | about 27 kg/m² |
|---|---|
| Thickness (mm) | about 54 kg/m² |
| Thickness (mm) | about 81 kg/m² |
| Thickness (mm) | about 108 kg/m² |
| Thickness (mm) | about 135 kg/m² |
| Slab 300 × 180 cm, 2 cm | about 292 kg |
| Slab 300 × 180 cm, 3 cm | about 437 kg |
| 20-foot container (about 27 t) | about 500 m² of 2 cm slabs |
Weights are calculated from the typical density of the stone family; the packing list of each shipment states the real weight.
Questions and answers
What is Emerald Pearl used for?
Emerald Pearl is a granite from Norway. Typical uses are kitchen worktops, exterior paving and cladding, stairs, high-traffic floors.
Which finishes are available for Emerald Pearl?
The usual finishes for this stone family are polished, honed, flamed, leathered, bush-hammered. The finish is chosen according to the use and confirmed with the offer.
How much does Emerald Pearl weigh?
About 54 kg per square metre at 2 cm and 81 kg at 3 cm, calculated from the typical density of the family.
How do I look after Emerald Pearl?
Water and a neutral detergent; sealing is recommended on light colours and textured finishes.
Can I buy the slab shown in this photo?
Natural stone changes from block to block. Send us this photo with the form: we check the lots available now in our warehouse and reply with current photos, sizes and price.
