Calacatta Oro marble – slab surface photo 25

Calacatta Oro marble slab surface – Marmi di Carrara – grey, black (25) — Calacatta Oro marble – slab surface photo 25. Photo © Marmi di Carrara srl.

About this photo

This photograph shows a slab surface in Calacatta Oro, a marble from Apuan Alps, Tuscany, Italy. The dominant tones measured on the image are grey (28%), black (24%), green (22%). Calacatta with warm gold veining on a white ground, selected block by block in the Carrara quarries. Typically supplied as book-matched slabs for walls, tops and bathrooms.

Dominant tones

grey 28%black 24%green 22%beige 14%

Tones are measured automatically on the photograph; light and screen settings change how a stone looks. Ask for current photos of the lot before deciding.

About Calacatta Oro

Calacatta Oro is a white marble from Apuan Alps, Tuscany, Italy. Marmi di Carrara supplies it as blocks, slabs of 2 and 3 cm, tiles and cut-to-size elements, in the finishes typical of this family: polished, honed, brushed, sandblasted, bush-hammered. Typical uses: flooring, wall cladding, bathrooms, vanity and kitchen tops, stairs, fireplaces, sculpture.

Technical sheet

Indicative price	from € 950/m² · polished 2 cm slabs, ex works Carrara, VAT excluded
Material	Calacatta Oro
Stone family	Marble
Origin	Apuan Alps, Tuscany, Italy
Base colour	White
Formats available	Blocks, slabs 2 cm and 3 cm, tiles, cut-to-size
Typical finishes	Polished, honed, brushed, sandblasted, bush-hammered
Typical uses	Flooring, wall cladding, bathrooms, vanity and kitchen tops, stairs, fireplaces, sculpture
Bulk density (EN 1936)	2,650–2,750 kg/m³
Water absorption (EN 13755)	0.1–0.6 %
Compressive strength (EN 1926)	70–140 MPa
Flexural strength (EN 12372)	7–20 MPa
Mohs hardness	3–4
Weight of a 2 cm slab	about 54 kg/m²
Photo shows	Slab surface
Image size	1200 × 820 px

Density, absorption and strength are indicative ranges for the stone family, not test results of this block. Certified values for a specific lot are provided with the offer.

Ask for this stone Ask the AI

All about Calacatta Oro →

Try it in a room with the Marble Engine AI tools →

Where to use Calacatta Oro

Interior floors	Excellent
Wall cladding	Excellent
Kitchen worktops	With care
Bathrooms and wet areas	Excellent
Exterior paving and façades	Good
Frost exposure	With care
Back-lighting	Limited

General guidance for the marble family. The right thickness, finish and treatment for Calacatta Oro are confirmed on your project.

Weights

Thickness (mm)	about 27 kg/m²
Thickness (mm)	about 54 kg/m²
Thickness (mm)	about 81 kg/m²
Thickness (mm)	about 108 kg/m²
Thickness (mm)	about 135 kg/m²
Slab 300 × 180 cm, 2 cm	about 292 kg
Slab 300 × 180 cm, 3 cm	about 437 kg
20-foot container (about 27 t)	about 500 m² of 2 cm slabs

Weights are calculated from the typical density of the stone family; the packing list of each shipment states the real weight.

Questions and answers

What is Calacatta Oro used for?

Calacatta Oro is a marble from Apuan Alps, Tuscany, Italy. Typical uses are flooring, wall cladding, bathrooms, vanity and kitchen tops, stairs, fireplaces, sculpture.

Which finishes are available for Calacatta Oro?

The usual finishes for this stone family are polished, honed, brushed, sandblasted, bush-hammered. The finish is chosen according to the use and confirmed with the offer.

How much does Calacatta Oro weigh?

About 54 kg per square metre at 2 cm and 81 kg at 3 cm, calculated from the typical density of the family.

How do I look after Calacatta Oro?

Water and a neutral stone detergent, no acids or descalers, and an impregnating sealer.

Can I buy the slab shown in this photo?

Natural stone changes from block to block. Send us this photo with the form: we check the lots available now in our warehouse and reply with current photos, sizes and price.