Marmi di Carrara Srl - Since 1956 Italian Marbles , Granite Onyx marble – polished sample photo 1
About this photo
This photograph shows a polished sample in Marmi di Carrara Srl - Since 1956 Italian Marbles , Granite Onyx, a marble from Italy. The dominant tones measured on the image are white (82%), ivory (18%). Marmi di Carrara Srl - Since 1956 Italian Marbles , Granite Onyx belongs to the marble family; typical uses are flooring, wall cladding, bathrooms, vanity and kitchen tops, stairs, fireplaces, sculpture.
Dominant tones
Tones are measured automatically on the photograph; light and screen settings change how a stone looks. Ask for current photos of the lot before deciding.
About Marmi di Carrara Srl - Since 1956 Italian Marbles , Granite Onyx
Marmi di Carrara Srl - Since 1956 Italian Marbles , Granite Onyx is a white marble from Italy. Petrographically it is classified as marble. Texture: veined. It is also traded as Breccia Corchia, Breccia Skiros d´Italia, Skiros d´Italia, Skiros, Bianco Carrara. Marmi di Carrara supplies it as blocks, slabs of 2 and 3 cm, tiles and cut-to-size elements, in the finishes typical of this family: polished, honed, brushed, sandblasted, bush-hammered. Typical uses: flooring, wall cladding, bathrooms, vanity and kitchen tops, stairs, fireplaces, sculpture. Blocks reach about 240 × 130 cm.
Where to use Marmi di Carrara Srl - Since 1956 Italian Marbles , Granite Onyx
| Interior floors | Excellent |
|---|---|
| Wall cladding | Excellent |
| Kitchen worktops | With care |
| Bathrooms and wet areas | Excellent |
| Exterior paving and façades | Good |
| Frost exposure | With care |
| Back-lighting | Limited |
General guidance for the marble family. The right thickness, finish and treatment for Marmi di Carrara Srl - Since 1956 Italian Marbles , Granite Onyx are confirmed on your project.
Weights
| Thickness (mm) | about 27 kg/m² |
|---|---|
| Thickness (mm) | about 54 kg/m² |
| Thickness (mm) | about 81 kg/m² |
| Thickness (mm) | about 108 kg/m² |
| Thickness (mm) | about 135 kg/m² |
| Slab 300 × 180 cm, 2 cm | about 292 kg |
| Slab 300 × 180 cm, 3 cm | about 437 kg |
| 20-foot container (about 27 t) | about 500 m² of 2 cm slabs |
Weights are calculated from the typical density of the stone family; the packing list of each shipment states the real weight.
Questions and answers
What is Marmi di Carrara Srl - Since 1956 Italian Marbles , Granite Onyx used for?
Marmi di Carrara Srl - Since 1956 Italian Marbles , Granite Onyx is a marble from Italy. Typical uses are flooring, wall cladding, bathrooms, vanity and kitchen tops, stairs, fireplaces, sculpture.
Which finishes are available for Marmi di Carrara Srl - Since 1956 Italian Marbles , Granite Onyx?
The usual finishes for this stone family are polished, honed, brushed, sandblasted, bush-hammered. The finish is chosen according to the use and confirmed with the offer.
How much does Marmi di Carrara Srl - Since 1956 Italian Marbles , Granite Onyx weigh?
About 54 kg per square metre at 2 cm and 81 kg at 3 cm, calculated from the typical density of the family.
How do I look after Marmi di Carrara Srl - Since 1956 Italian Marbles , Granite Onyx?
Water and a neutral stone detergent, no acids or descalers, and an impregnating sealer.
Can I buy the slab shown in this photo?
Natural stone changes from block to block. Send us this photo with the form: we check the lots available now in our warehouse and reply with current photos, sizes and price.
