Blue Eyes marble – slab surface photo 2

Blue Eyes marble slab surface – Marmi di Carrara – grey, green (2) — Blue Eyes marble – slab surface photo 2. Photo © Marmi di Carrara srl.

About this photo

This photograph shows a slab surface in Blue Eyes, a marble. The dominant tones measured on the image are grey (81%), green (19%). Blue Eyes belongs to the marble family; typical uses are flooring, wall cladding, bathrooms, vanity and kitchen tops, stairs, fireplaces, sculpture.

Dominant tones

grey 81%green 19%

Tones are measured automatically on the photograph; light and screen settings change how a stone looks. Ask for current photos of the lot before deciding.

About Blue Eyes

Blue Eyes is a marble. Petrographically it is classified as anorthosite. Texture: medium. It is also traded as Blu Eyes, Reflect Blue. Marmi di Carrara supplies it as blocks, slabs of 2 and 3 cm, tiles and cut-to-size elements, in the finishes typical of this family: polished, honed, brushed, sandblasted, bush-hammered. Recommended applications: suitable for interior and exterior applications.

Technical sheet

Indicative price	from € 270/m² · polished 2 cm slabs, ex works Carrara, VAT excluded
Material	Blue Eyes
Stone family	Marble
Origin	On request
Formats available	Blocks, slabs 2 cm and 3 cm, tiles, cut-to-size
Typical finishes	Polished, honed, brushed, sandblasted, bush-hammered
Typical uses	Flooring, wall cladding, bathrooms, vanity and kitchen tops, stairs, fireplaces, sculpture
Bulk density (EN 1936)	2,650–2,750 kg/m³
Water absorption (EN 13755)	0.1–0.6 %
Compressive strength (EN 1926)	70–140 MPa
Flexural strength (EN 12372)	7–20 MPa
Mohs hardness	3–4
Weight of a 2 cm slab	about 54 kg/m²
Photo shows	Slab surface
Image size	1024 × 683 px

Density, absorption and strength are indicative ranges for the stone family, not test results of this block. Certified values for a specific lot are provided with the offer.

Catalogue data

Also known as	Blu Eyes, Reflect Blue
Trade classification	Granite
Petrographic classification	Anorthosite
Texture and grain	medium
Recommended applications	Suitable for interior and exterior applications
Availability	low

Ask for this stone Ask the AI

All about Blue Eyes →

Try it in a room with the Marble Engine AI tools →

Where to use Blue Eyes

Interior floors	Excellent
Wall cladding	Excellent
Kitchen worktops	With care
Bathrooms and wet areas	Excellent
Exterior paving and façades	Good
Frost exposure	With care
Back-lighting	Limited

General guidance for the marble family. The right thickness, finish and treatment for Blue Eyes are confirmed on your project.

Weights

Thickness (mm)	about 27 kg/m²
Thickness (mm)	about 54 kg/m²
Thickness (mm)	about 81 kg/m²
Thickness (mm)	about 108 kg/m²
Thickness (mm)	about 135 kg/m²
Slab 300 × 180 cm, 2 cm	about 292 kg
Slab 300 × 180 cm, 3 cm	about 437 kg
20-foot container (about 27 t)	about 500 m² of 2 cm slabs

Weights are calculated from the typical density of the stone family; the packing list of each shipment states the real weight.

Questions and answers

What is Blue Eyes used for?

Blue Eyes is a marble. Typical uses are flooring, wall cladding, bathrooms, vanity and kitchen tops, stairs, fireplaces, sculpture.

Which finishes are available for Blue Eyes?

The usual finishes for this stone family are polished, honed, brushed, sandblasted, bush-hammered. The finish is chosen according to the use and confirmed with the offer.

How much does Blue Eyes weigh?

About 54 kg per square metre at 2 cm and 81 kg at 3 cm, calculated from the typical density of the family.

How do I look after Blue Eyes?

Water and a neutral stone detergent, no acids or descalers, and an impregnating sealer.

Can I buy the slab shown in this photo?

Natural stone changes from block to block. Send us this photo with the form: we check the lots available now in our warehouse and reply with current photos, sizes and price.