Alliance Brown granite – polished sample photo 1

Alliance Brown granite polished sample – Marmi di Carrara – black, charcoal (1) — Alliance Brown granite – polished sample photo 1. Photo © Marmi di Carrara srl.

About this photo

This photograph shows a polished sample in Alliance Brown, a granite from India. The dominant tones measured on the image are black (76%), charcoal (24%). Alliance Brown belongs to the granite family; typical uses are kitchen worktops, exterior paving and cladding, stairs, high-traffic floors.

Dominant tones

black 76%charcoal 24%

Tones are measured automatically on the photograph; light and screen settings change how a stone looks. Ask for current photos of the lot before deciding.

About Alliance Brown

Alliance Brown is a brown granite from India. Petrographically it is classified as syenit. Texture: medium. It is also traded as Tan Brown. Marmi di Carrara supplies it as blocks, slabs of 2 and 3 cm, tiles and cut-to-size elements, in the finishes typical of this family: polished, honed, flamed, leathered, bush-hammered. Recommended applications: suitable for interior and exterior applications. Blocks reach about 320×180 cm.

Technical sheet

Indicative price	from € 115/m² · polished 2 cm slabs, ex works Carrara, VAT excluded
Material	Alliance Brown
Stone family	Granite
Origin	India
Base colour	Brown
Formats available	Blocks, slabs 2 cm and 3 cm, tiles, cut-to-size
Typical finishes	Polished, honed, flamed, leathered, bush-hammered
Typical uses	Kitchen worktops, exterior paving and cladding, stairs, high-traffic floors
Bulk density (EN 1936)	2,600–2,800 kg/m³
Water absorption (EN 13755)	0.1–0.6 %
Compressive strength (EN 1926)	100–250 MPa
Flexural strength (EN 12372)	8–25 MPa
Mohs hardness	6–7
Weight of a 2 cm slab	about 54 kg/m²
Photo shows	Polished sample
Image size	1200 × 900 px

Density, absorption and strength are indicative ranges for the stone family, not test results of this block. Certified values for a specific lot are provided with the offer.

Catalogue data

Also known as	Tan Brown
Trade classification	Granite
Petrographic classification	Syenit
Texture and grain	medium
Recommended applications	Suitable for interior and exterior applications
Availability	good
Maximum block size	320×180 cm

Ask for this stone Ask the AI

All about Alliance Brown →

Try it in a room with the Marble Engine AI tools →

Where to use Alliance Brown

Interior floors	Excellent
Wall cladding	Excellent
Kitchen worktops	Excellent
Bathrooms and wet areas	Excellent
Exterior paving and façades	Excellent
Frost exposure	Excellent
Back-lighting	Not suitable

General guidance for the granite family. The right thickness, finish and treatment for Alliance Brown are confirmed on your project.

Weights

Thickness (mm)	about 27 kg/m²
Thickness (mm)	about 54 kg/m²
Thickness (mm)	about 81 kg/m²
Thickness (mm)	about 108 kg/m²
Thickness (mm)	about 135 kg/m²
Slab 300 × 180 cm, 2 cm	about 292 kg
Slab 300 × 180 cm, 3 cm	about 437 kg
20-foot container (about 27 t)	about 500 m² of 2 cm slabs

Weights are calculated from the typical density of the stone family; the packing list of each shipment states the real weight.

Questions and answers

What is Alliance Brown used for?

Alliance Brown is a granite from India. Typical uses are kitchen worktops, exterior paving and cladding, stairs, high-traffic floors.

Which finishes are available for Alliance Brown?

The usual finishes for this stone family are polished, honed, flamed, leathered, bush-hammered. The finish is chosen according to the use and confirmed with the offer.

How much does Alliance Brown weigh?

About 54 kg per square metre at 2 cm and 81 kg at 3 cm, calculated from the typical density of the family.

How do I look after Alliance Brown?

Water and a neutral detergent; sealing is recommended on light colours and textured finishes.

Can I buy the slab shown in this photo?

Natural stone changes from block to block. Send us this photo with the form: we check the lots available now in our warehouse and reply with current photos, sizes and price.